PROFIBUS-ACCESSORIES

PROFIBUS CONNECTOR 90° Screw

The PROFIBUS connector 90° diagnostics LED is equipped with a proven and reliable screw terminal.

It is quickly mounted and has integrated, connectable terminating resistors.
For improved EMC compatibility, the housing of the plug is metalized.
Using the PROFIBUS connector diagnosis, a PROFIBUS network can be established in which the user can at any time check the state of the bus system at a glance.
The three built-in LEDs with the easily distinguished colors blue, green, and orange indicate the most important states of the PROFIBUS network at each station. The state of the terminating resistor (orange), whether bus activity is present (green), and whether the addressed participant is participating in the bus traffic (blue) are displayed.
In this way you can immediately recognize error states such as bus interrupts, missing or incorrectly connected terminating resistors, and malfunctioning or failed bus participants.
The PROFIBUS connector works in the extended ambient temperature range of -25 °C to +85 °C.

 

Exits on 2 versions : WITH PG and WITHOUT PG

Overview

  • 3 status LEDs to indicate “bus operation,” “participant is sending,” “terminating resistor inserted”
  • Metalized housing
  • No parts that can be lost
  • Integrated switchable terminating resistor
  • 90° cable outlet
  • Proven screw terminal
  • The PROFIBUS connectors are also available in packs of 10 or 50
  • The maximum ambient temperature for UL is +60 °C

Technical details

General information
Order number 700-972-7BA12
Article name PROFIBUS connector, 90° screw terminal, diagnostics LED, without PG
Scope of delivery PROFIBUS connector, installation instructions
Dimensions (DxWxH) 64 x 40 x 17 mm
Weight Approx. 40 g
Cable outlet Vertical cable outlet, suitable for FastConnect stripping tool
PROFIBUS interface
Number 1
Transmission rate max. 12 Mbps
Connection SUB-D connector, 9-pin
Terminating resistor Resistor combination integrated and switchable using slide switch
PG connection socket No
PROFIBUS bus cable 60/75 °C copper cable up to 1.0 mm2
Connector
Connector type terminal strips
Number 4
Maximum outside diameter 8.0 mm
Status indicator 1 LED, 3-color
Voltage supply + 4.75 … + 5.25 V DC (must come from the device)
Current draw without modules (internal) Max. 35 mA
Ambient conditions
Ambient temperature -25 °C … +85 °C( The maximum ambient temperature for UL is +60 °C.)
Transport and storage temperature -25 °C … +85 °C
Relative air humidity 70 % at +25 °C
Pollution degree 2
Protection rating IP20
Certifications CE, UL
CE
RoHS Yes
REACH Yes

References

Product Reference

  • PROFIBUS connector, 90°, screw terminal connector, with diagnostics LED, without PG, incl. installation instructions : ATV-700-972-7BA12
  • PROFIBUS connector, 90°, screw terminal connector, with diagnostics LED, with PG, incl. installation instructions :       ATV-700-972-7BB12

PROFIBUS Compact Repeater

PROFIBUS compact repeater

The patented PROFIBUS compact repeater is a full PROFIBUS repeater that is versatile due to its very small size. It enables transfer rates of 9.6 kbps to 12 Mbps.

 

  • Alternative to conventional PROFIBUS repeaters
  • No additional space required in the control cabinet
  • Can be used for bus extension or as a spur line
  • Increase the number of participants
  • System expansion
  • Can also be used in MPI networks
  • Status LEDs
  • No 24 V supply required
  • 5 V power supply directly from the PROFIBUS terminal, making it usable on every PROFIBUS device

Overview

The transmission signals are regenerated by the repeater and re-sent (bit-reshaping and retransmission) so that faults in the line are largely eliminated.
The PROFIBUS compact repeater is a great alternative to conventional repeaters for a large number of applications, both technically and in terms of price. It can be used for bus extension (up to 1 km with 2 PROFIBUS compact repeaters), to increase the number of participants, and to expand the system. Use in MPI networks is also possible. As a special application option, the PROFIBUS compact repeater allows the setup of stubs as separate segments. For this it can be plugged directly into the PG connection of an existing PROFIBUS connector.
Due to the compact design, no additional space is needed in the control cabinet, as the PROFIBUS compact repeater can be used instead of a PROFIBUS connector and is simply plugged into a participant on the PROFIBUS network. Furthermore, no separate power supply is required, because the PROFIBUS compact repeater uses the 5 V power supply, which every PROFIBUS device makes available for the terminating resistor. The PROFIBUS compact repeater establishes a potential separation between the two PROFIBUS segments.
The integrated status LEDs provide a quick overview on the current bus status.

Technical details

General information
Order number 700-972-0RB12
Article name PROFIBUS compact repeater
Scope of delivery PROFIBUS compact repeater, instructions
Dimensions (DxWxH) 64 x 40 x 17 mm
Weight Approx. 40 g
PROFIBUS interface
Number 1
Protocol PROFIBUS-DP
Transmission rate Max. 9.6 … 12 Mbps, autom. detection
Connection SUB-D connector, 9-pin
Cable outlet 90 °

References

Réference produit : atv-700-972-0RB12