EZ Gateway KNX to BACnet
The EZ Gateway KNX to BACnet (FS-EZX-KNX-BAC) is an easy-to-use, high-performance building and industrial automation IIoT gateway for integrators to connect to the cloud and interface KNX certified products to BACnet management systems in commercial buildings, campuses, and industrial facilities. KNX-certified products encompass a wide range of applications such as lighting control, heating, ventilation and air conditioning control, shutter/blind and shading control, alarm monitoring, energy, gas, and water metering, and audio and video distribution. The EZ Gateway KNX to BACnet integrates such KNX-based devices and systems to both flavors of BACnet-based management systems over BACnet MS/TP or BACnet/IP protocols. KNX to BACnet protocol translations include:
- KNX to BACnet/IP
- KNX to BACnet MS/TP
The EZ Gateway KNX to BACnet is available in 500 and 1000 point count configurations with superior network response times. With the EZ Gateway KNX to BACnet, the integrator or contractor can rely on the product’s interoperable and field-tested protocol implementation, and does not need to be a protocol expert. The integrator can also minimize configuration and commissioning time, while also reducing ongoing operating and maintenance costs.
1. SMC Device Cloud support
Register your EZ Gateway to the SMC Cloud interface for remote access to local applications, configuration, and device management
2. KNX Interoperability
Connect with virtually any KNX-certified device out of the box
- ETS Support: Seamlessly import KNX Group addresses from ETS to lower commissioning time
3. BACnet COV
Use the Change of Value (CoV) setting to reduce the amount of BACnet data overhead to allow network traffic to be less congested by transmitting data only when detecting a KNX device status has changed
4. DeviceProxy™
Minimize management and operational costs with granular visibility and control over each KNX device from a BACnet management station
5. Remote Access and Support
All FieldServer gateways come with Remote Access support. Once registerd to the SMC Cloud, use the Remote Access capability to attach to the FieldServer gateway to monitor, maintain and troubleshoot installed equipment
| Model Numbers | FS-EZ1-KNX-BAC: 500 point capacity FS-EZ2-KNX-BAC: 1000 point capacity |
| Environment | Operating Temperature: -40 to 75°C (-40 to 167°F) Relative Humidity: 5-90% RH non-condensing |
| Power Requirements | 9-30 VDC or 12-24 VAC
Current draw: @ 12V
|
| Enclosure | Dimensions: 4.5 x 2.9 x 1.6 in. (11.5 x 7.4 x 4.1 cm) Weight: 0.4 lbs (0.2 Kg) |
| Other | Configuration/Diagnostic utilities Table, wall, or DIN rail mount |
| Communication | Baud:9600 Start Bit: 8 Stop Bit: 1 Parity:Odd Ethernet: 10/100 BaseT MDIX |
| Approvals | TUV Approved to UL 916, EN 60950-1, EN 50491-3 and CSA C22.2 standards BTL Certifed, Rev. 12 RoHS Compliant GOST-R Certified CE and FCC |
Documents
- EZ Gateway KNX to BACNet Datasheet
- EZ Gateway KNX to BACNet Statup Guide
- FieldServer Protocol Driver Sheet ( BACnet PIC Statement)
Software
- FieldServer Toolbox ( detect and manage fieldservers devices available )
